
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-75SB is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-75SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M16x1.5) screw lets you dial the outward stroke anywhere between 5 and 80 mm directly on the machine, avoiding shims or part swaps.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 piston rod thread. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Note that this mechanical stop is not a mid-stroke lock; the piston drifts if air pressure is lost or the valve is centered.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 80 mm to accommodate varying raw casting thicknesses on a fixture without machining custom spacers.
Choose the 50 mm bore when you need nearly a kilonewton of force but have limited mounting footprint.
The 75 mm adjustment window is ideal for machinery requiring frequent format changeovers or trial positioning. Confirm your installation requires the PT1/4 air port, a maximum 80 mm extend, and the male M18x1.5 rod end. If the application demands true load holding without live pressure, supplement this cylinder with an external rod lock or a pilot-operated check valve, as the fixed bumper only decelerates the stroke end.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The R (M16x1.5) screw mechanically shortens the extend stop by up to 75 mm, allowing an outward stroke between 5 and 80 mm without changing the force output. The -S code denotes a built-in piston magnet for triggering AirTAC reed or electronic solid-state switches; it does not interfere with the mechanical stop adjustment.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.