
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward end-position anywhere between 55 and 85 mm directly on the machine, avoiding part swaps.
This variant utilizes a male-threaded M18x1.5 piston rod (Ø20 mm) for secure external mounting. The short riveted body drastically reduces axial mounting depth compared to larger profile alternatives, while a fixed NBR bumper at each end decelerates the stroke end. Note that this SKU lacks a piston magnet and cannot support sensing; adding an -S option is required for reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod extension on the fly to match different box heights, letting the fixed NBR bumper absorb the end shock while maintaining a consistent seal depth.
Set precise vertical lift heights up to 85 mm for 50 kg loads; tweak the mechanical stop during commissioning to find the exact travel before locking the R screw down.
Choose the SDAJ50X85-30B specifically for setups requiring on-site stroke tuning between 55 and 85 mm via the M16x1.5 adjuster.
Confirm the 50 mm bore, 85 mm maximum stroke, 30 mm adjustment window, and PT1/4 air port. This specific SKU includes the -B male M18x1.5 rod thread but no -S magnet, meaning position sensing is unsupported. Remember that a plain cylinder does not hold a load on air loss or valve centring; the fixed NBR bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The adjustment screw does not alter these force figures.
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 30 mm, providing a usable range of 55 to 85 mm. This SKU lacks a piston magnet, so it cannot take a switch; you must select the -S option to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.