
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-40B is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M16x1.5 adjuster screw dials the outward stop from 45 to 85 mm, letting you refine travel during commissioning without swapping parts.
This variant features a male M18x1.5 piston rod thread and a PT1/4 air port. The short riveted body minimizes axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion. Note that this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 45 and 85 mm to set precise clamping depth on machining fixtures, absorbing part variance without fabricating custom spacers.
Choose this specific model when setups demand frequent changeover or trial positioning within the 45-85 mm window.
Confirm the 85 mm maximum stroke, 40 mm adjustment window, PT1/4 port, and the male M18x1.5 rod end. Remember that a plain double-acting cylinder drifts if air is lost or the valve centers; the fixed bumper and mechanical stop do not lock the load. For vertical or suspended loads requiring holding power without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
Turning the M16x1.5 external screw shortens the extend stroke by up to 40 mm, yielding a usable 45-85 mm range. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.