
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X100-30SB is a compact double-acting double-rod cylinder built for strict axial length limits. Its short riveted body saves mounting depth where round-body or profile variants fail to fit, while the M16x1.5 external adjuster screw lets you dial the extend stop directly on the machine. You can tune the outward stroke anywhere between 70 and 100 mm without swapping shims or parts.
This specific configuration includes a male M18x1.5 piston rod thread and a built-in magnet for position sensing. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Feeds bearings into housings where the male M18x1.5 rod mounts the tooling and the stop screw sets precise 70-100 mm insertion depth.
When sizing this 63 mm bore actuator, evaluate your force needs against its neighbours. Stepping down to an SDAJ50 drops the 0.5 MPa push output to 981.7 N, whereas moving up to an SDAJ80 raises it to 2513.3 N.
Choose this version if your fixture requires frequent changeover or trial positioning within the 70-100 mm extend window. It carries the S magnet code for AirTAC reed or electronic switches, and the B code for its male M18x1.5 rod end. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 R screw mechanically shortens the extend stop by up to 30 mm, giving a usable 70-100 mm outward range while retract remains full. The built-in S magnet works with AirTAC reed or electronic solid-state switches in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.