
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, technicians can shorten the outward stroke on-site across a 100 to 110 mm window without swapping shims or parts.
Designed to save axial mounting depth where larger profile bodies cannot fit, this riveted unit carries a 20 mm piston rod and a male M18x1.5 thread end. It operates at 30-500 mm/s and relies on a fixed NBR bumper to decelerate the stroke end, which is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; the -S variant is required for position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop by up to 10 mm during line changeovers to accommodate varying package widths, using the male M18x1.5 rod to mount custom diverting arms.
When sizing this 63 mm bore, evaluate your force requirements bidirectionally. It is ideal for setups needing 10 mm of on-site extend fine-tuning.
Confirm the 110 mm maximum stroke, 10 mm adjustment window, and PT1/4 port. This SKU includes the -B option, meaning it uses a male M18x1.5 piston rod thread instead of the default female M10x1.5. Remember that a plain cylinder does not hold its load upon air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port.
Turning the M16x1.5 adjuster screw mechanically shortens the extend endpoint between 100 and 110 mm without changing the output force. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must specify the -S option for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.