
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-30 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-30 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can set the outward travel anywhere between 80 and 110 mm without shims or part changes, while retract remains full length.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 80 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the outward stroke via the M16x1.5 screw when switching product families, maintaining a safe 935 N working load for varying tooling weights.
When sizing this 63 mm bore, evaluate both neighbours. Choose the 63 mm if your changeover-heavy line requires on-site stroke tuning across the 80-110 mm window.
Confirm your parameters: 63 mm bore, 110 mm max stroke, 30 mm adjust window, PT1/4 port, 20 mm rod, female M10x1.5 thread, and no magnet. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum is 318 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw shortens the extend end position by up to 30 mm, giving a usable extend range of 80 to 110 mm. It sets the mechanical stop and does not alter force. This SKU lacks the -S magnet, so it cannot accept sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.