
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-40 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-40 is a double-acting compact cylinder featuring an external R (M16x1.5) adjuster screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 80 and 120 mm without swapping shims or parts, making it highly effective for frequent line changeovers. Retract travel remains full length.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 120 mm on the fly to accommodate different fixture heights during production line changeovers.
Adjust the mechanical stop externally to handle varying box sizes without reprogramming the motion controller or changing parts.
If your application is lighter, the smaller SDAJ50 yields 981.7 N at 0.5 MPa; if you need substantially more power, stepping up to the SDAJ80 provides 2513.3 N at 0.5 MPa. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches—choose the -S variant if sensing is required.
Operators needing on-site stroke tuning for trial positioning will benefit from the 40 mm adjustment window. Confirm your requirements for bore, 120 mm max stroke, 40 mm window, PT1/4 port, and female M10x1.5 rod thread. Remember that a plain cylinder does not hold position on air loss or valve centering—the bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port.
Turning the R (M16x1.5) screw shortens the extend end position by up to 40 mm, allowing usable travel between 80 and 120 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder will drift if air is lost, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.