
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-40S is a double-acting compact cylinder featuring an external R (M16x1.5) adjustment screw that dials the extend stop between 80 and 120 mm directly on your machine.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit. The unit relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion, and the built-in piston magnet (-S) supports AirTAC reed or electronic solid-state switches for position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 120 mm to accommodate varying raw casting thicknesses on a milling fixture without machining new spacer plates.
Set precise upper travel limits for a 79.4 kg vertical lift mechanism, relying on the fixed NBR bumper to absorb the final end-of-stroke impact.
Choose this specific configuration when your fixture requires frequent on-machine stroke tuning across an 80 to 120 mm window. It features a PT1/4 port, a 20 mm rod, and female M10x1.5 rod-end threads. Remember that a plain cylinder does not hold position on air loss or valve centring; the bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The M16x1.5 R screw mechanically shortens the extend stroke by up to 40 mm, yielding an 80 to 120 mm usable range without changing force. The included -S magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.