
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-75B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-75B is a double-acting compact cylinder featuring an on-site adjustable extend stop. A recessed M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 45 and 120 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant features a male M18x1.5 piston rod thread and lacks a piston magnet. Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 45 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward reach on packaging lines during format changes, using the male M18x1.5 thread to quickly secure different end-effectors.
Find the exact ejection point on assembly fixtures by turning the M16x1.5 screw, locking the mechanical stop once the optimal 45-120 mm travel is found.
If your application requires less force, the SDAJ50 provides 981.7 N; stepping up to the SDAJ80 yields 2513.3 N. Choose this specific 63 mm model when you need substantial push force combined with a 75 mm on-machine adjustment window.
This SKU includes the -B option for a male-threaded rod and has no -S magnet, so it cannot host reed or electronic switches. Remember that a standard cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end cap and the R screw acts as a mechanical stop, not a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The external M16x1.5 screw mechanically shortens the extend stroke from 120 mm down to 45 mm. It does not alter force and is not a mid-stroke lock; the cylinder cannot hold a load without air pressure or an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.