
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-75 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X130-75 is a compact double-acting double-rod cylinder engineered for high-force applications where the extend end-position requires frequent on-site tuning. By turning the external M16x1.5 adjuster screw, you shorten the forward stroke anywhere within a 55 to 130 mm window without swapping shims or parts.
Built with a short riveted body, this unit saves axial mounting depth in tight machine envelopes where larger profile or round-body actuators will not fit. It features a 20 mm piston rod, a PT1/4 air port, and fixed NBR bumpers at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding the -S option enables sensing capabilities.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 130 mm |
| Adjustable range | 55 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 55-130 mm extend stop on the M16x1.5 screw during press fit commissioning to find the exact seating depth without machining new spacers.
When sizing this actuator, evaluate your force requirements bidirectionally. Choose this model if your setup-heavy line demands on-site stroke tuning across the 55 to 130 mm range.
Confirm the 63 mm bore, 130 mm maximum stroke, 75 mm adjustment window, and PT1/4 porting fit your manifold. The female M10x1.5 rod-end thread must align with your load to avoid side load. Crucially, a plain cylinder does not hold its load upon air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The external M16x1.5 screw shortens the extend stroke by up to 75 mm, allowing you to set the forward stop anywhere between 55 and 130 mm. This SKU has no piston magnet and cannot take a switch; selecting the -S option adds a magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.