
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-75B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X130-75B is a compact double-acting double-rod cylinder built for on-site extend positioning. Its external M16x1.5 adjuster screw dials the forward stop from 55 to 130 mm, letting you finalize travel during machine commissioning without swapping shims or parts.
This variant features a male M18x1.5 piston rod thread and a PT1/4 port. The short riveted body minimizes axial footprint where space is tight, while a fixed NBR bumper decelerates the end of travel. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 130 mm |
| Adjustable range | 55 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 55-130 mm forward clamping reach on machining fixtures, using the male M18x1.5 rod to secure parts while avoiding over-travel.
Set precise vertical lift limits up to 130 mm.
Stepping down to the SDAJ50 yields 981.7 N, whereas moving up to the SDAJ80 provides 2513.3 N.
Choose this unit if your fixture requires frequent changeovers or trial positioning across the 55-130 mm window. Confirm your setup requires a male M18x1.5 rod end and the nonstandard 130 mm stroke. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa.
The external M16x1.5 screw shortens the extend stroke by up to 75 mm, allowing you to set the forward stop anywhere between 55 and 130 mm directly on the machine. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.