
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-20B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
It features a short riveted body that saves mounting depth where larger profile or round-body units fail to fit. An external R (M16x1.5) adjustment screw lets you dial the extend end-position down from the nominal 20 mm to zero directly on the machine.
Because the adjuster sets the mechanical stop rather than altering the piston area, output force remains equal to a standard SDA of this 63 mm bore. End-of-travel energy is managed solely by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. This specific SKU includes a male-threaded M18x1.5 piston rod (-B) for direct mounting and lacks a piston magnet, meaning it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Secure heavy workpieces in confined machining cells where the compact riveted body saves depth, providing a safe 935 N clamping force at 0.5 MPa.
Choose this configuration if your fixture requires on-site stroke tuning within the 0-20 mm window and a male M18x1.5 rod end. Confirm your porting matches the bore-fixed PT1/4 thread. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder uses a PT1/4 port.
The R (M16x1.5) screw shortens the extend stroke from 20 mm down to 0 mm without changing the force. The -B suffix denotes a male M18x1.5 piston rod. This SKU lacks the -S magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.