
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X25-30B is a compact, double-acting double-rod cylinder built for applications requiring an external extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke down from 25 mm right at the machine, offering a usable extend range of 0-25 mm without swapping shims or parts.
This thin, riveted-body design saves axial mounting depth where a larger profile cylinder will not fit. The unit features a male M18x1.5 piston rod thread and a PT1/4 air port. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the male M18x1.5 rod stop for different package sizes on a packing line, avoiding teardown time while maintaining full retract motion.
Restrict the upward travel of a 79.4 kg vertical lift platform, using the external adjuster to test reach limits safely before finalizing the mechanical stop.
Stepping down to the SDAJ50 yields 981.7 N, whereas stepping up to the SDAJ80 provides 2513.3 N.
Choose this specific configuration when your fixture requires on-site stroke tuning alongside a male-threaded M18x1.5 rod end. Remember that a standard cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift, and the fixed bumper only decelerates near the end of travel. For suspended or vertical loads that must remain stationary without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
The M16x1.5 R screw shortens the extend end position by up to 30 mm, giving a usable 0-25 mm extend range while retract remains full. This SKU has no piston magnet, so it cannot support magnetic switches; you would need the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.