
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X30-10B is a double-acting compact cylinder featuring an on-site adjustable extend stop. By turning the external M16x1.5 adjuster screw, you can shorten the forward end-position anywhere between 20 and 30 mm, eliminating the need for shims or part swaps during machine commissioning.
This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. It comes equipped with a male M18x1.5 piston rod thread for secure external mounting and utilizes a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for pressing bearings where the final 20-30 mm position needs micro-adjustments on the machine to achieve a perfect seat without swapping cylinders.
Speeds up product changeovers on packaging lines by letting operators turn the external screw to alter the extend endpoint for varying package sizes instantly.
Choose this specific model if your assembly requires on-site extend tuning between 20 and 30 mm.
Confirm your parameters match the 63 mm bore, 30 mm maximum stroke, 10 mm adjustment window, and PT1/4 air port. This variant includes the -B male M18x1.5 rod thread and no -S magnet. Keep in mind that a plain cylinder does not hold a load if air pressure drops or the valve centers—the piston will drift, as the fixed NBR bumper only decelerates near the end of travel and acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 adjuster screw mechanically limits the extend stroke, allowing you to set the end position anywhere between 20 and 30 mm. It does not alter the output force, nor does it function as a mid-stroke lock or brake. The retract stroke remains full length.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.