
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X35-30SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke on-site from 5 to 35 mm, eliminating the need for shims or part swaps during machine commissioning.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 threaded rod end. The short riveted body minimizes axial mounting depth, while a fixed NBR bumper decelerates the piston at the stroke extremes. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 35 mm |
| Adjustable range | 5 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rotate the M16x1.5 screw to shift the extend position for different product lengths on a packaging line, avoiding teardown or shim fabrication.
Safely test vertical lift heights up to 79.4 kg, tweaking the outward stroke on the fly to find the exact engagement point before finalizing a cycle.
When sizing this 63 mm bore, evaluate your force requirements carefully. Choose this model if your fixture requires exact on-machine extend tuning between 5 and 35 mm.
Confirm the 63 mm bore, 35 mm maximum stroke, 30 mm adjustment window, and PT1/4 air port. This variant includes the -S magnet for position sensing and the -B male M18x1.5 piston rod. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port.
The M16x1.5 R screw shortens the extend stroke by up to 30 mm, allowing an outward range of 5 to 35 mm without altering the force. The included -S magnet enables position detection using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.