
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-40SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X65-40SB is a double-acting compact cylinder featuring a male-thread M18x1.5 piston rod and a built-in magnet for position sensing. An external M16x1.5 adjuster screw lets you dial the extend end-position anywhere between 25 and 65 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body saves valuable axial mounting depth where a larger profile cylinder would not fit, while the integrated NBR bumpers absorb end-of-stroke shock. This specific configuration includes the -S magnet for AirTAC reed or electronic switches and the -B male rod end for secure external mounting. Note that the bumper decelerates the stroke but does not lock the load; for vertical or suspended loads without live air pressure, an external rod lock or pilot-operated check valve is required.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 65 mm |
| Adjustable range | 25 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 65 mm via the M16x1.5 screw to accommodate varying part heights on machining fixtures without fabricating new spacers.
Choose this adjustable variant if your fixture setup requires frequent trial positioning or on-machine stroke tuning between 25 and 65 mm.
Confirm the 63 mm bore, 65 mm maximum stroke, 40 mm adjustment window, and PT1/4 air port match your pneumatic supply. This unit is configured with the -S magnet for reed or electronic sensing and the -B male M18x1.5 rod thread. Remember that a plain compact cylinder drifts when air is lost or the valve is centered; the fixed NBR bumper only decelerates near the end of travel and acts purely as a mechanical stop, never a brake.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend stroke by up to 40 mm, allowing the rod to stop anywhere between 25 mm and 65 mm. The included -S magnet enables position detection using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.