
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-50B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can shorten the outward stroke on-site across a 25 to 75 mm window without changing parts.
This variant features a male-threaded piston rod (M18x1.5) for direct load mounting and a short riveted body that minimizes axial footprint where space is tight. It uses a fixed NBR bumper at the ends to decelerate impact, operating at speeds of 30-500 mm/s. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S version.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Allows operators to fine-tune the 25-75 mm extend stop on the factory floor, ensuring precise contact force during light-duty press fits without swapping shims.
Choose this specific model if your fixture requires on-site stroke tuning to dial in exact end positions.
Confirm your parameters: 63 mm bore, 75 mm max stroke, 50 mm adjustment window, PT1/4 port, and a male M18x1.5 rod thread. Remember that a plain cylinder drifts when air is lost or the valve is centred—the fixed bumper only decelerates near the end of travel and does not lock the load. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port.
Turning the M16x1.5 adjuster screw shortens the extend stroke anywhere between 25 and 75 mm, functioning as a mechanical stop that does not alter force. This SKU has no magnet, so it cannot take a switch; you must select the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.