
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-75SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-75SB is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 0 to 75 mm directly on your machine. Retract travel stays full length.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches and a male M18x1.5 piston rod thread (-B) instead of the default female M10x1.5. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Accommodate rapidly changing carton sizes on a packaging line by turning the M16x1.5 adjuster screw to reposition the male M18x1.5 rod end perfectly.
Set precise lower stops for multi-level palletizing tasks, safely managing a 79.4 kg vertical lift capacity while relying on the fixed NBR bumper for end deceleration.
Choose this specific unit when your fixture requires on-site extend tuning across the full 0-75 mm window.
Confirm the 63 mm bore, 75 mm maximum stroke, 75 mm adjustment window, and PT1/4 air port. The -S code enables switch sensing, and the -B code provides the male M18x1.5 rod end. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The external R (M16x1.5) screw shortens the extend stop by up to 75 mm, allowing a usable extend range of 0-75 mm; retract remains full stroke. The -S code denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.