
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-30SB is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. This mechanism lets you dial the extend end-position anywhere between 55 and 85 mm directly on your machine, avoiding part swaps.
Built with a short riveted body, this unit saves axial mounting depth where round-body alternatives will not fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M18x1.5 piston rod thread (-B) for secure external mounting. End shock is managed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop on-site to accommodate different box heights, using the male M18x1.5 rod to drive folding arms precisely within the 30 mm window.
When sizing this 63 mm bore, evaluate your force requirements against its neighbours.
Choose this specific configuration if your fixture requires on-site stroke tuning between 55 and 85 mm. It carries the -S magnet for position sensing and the -B male M18x1.5 rod end. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, withstands 1.5 MPa proof pressure, and runs at speeds of 30-500 mm/s.
The external M16x1.5 screw shortens the extend stroke by up to 30 mm, allowing you to set the stop anywhere between 55 and 85 mm. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.