
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-40S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your equipment. You can set the outward travel anywhere between 45 and 85 mm without swapping parts or adding shims, making it highly effective for frequent format changeovers.
This 63 mm bore actuator utilizes a short riveted body to minimize axial mounting depth in tight machine envelopes. It comes with a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and the unit operates reliably at speeds between 30 and 500 mm/s.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 45-85 mm extend stop on the fly during machining changeovers to accommodate varying workpiece heights without fabricating new spacer plates.
Adjust the push rod reach along a conveyor line to handle different package sizes, using the built-in magnet to confirm the final extend position.
When sizing this model, evaluate the neighboring bores to match your thrust requirements accurately.
This specific configuration includes a 20 mm diameter piston rod, a PT1/4 air port, and a female M10x1.5 rod-end thread. The -S magnet code is present for position sensing, and the 40 mm adjustment window allows precise extend tuning. Remember that a plain pneumatic actuator does not hold a load if air pressure drops or the valve is centered; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
The external M16x1.5 screw shortens the extend stroke by up to 40 mm, allowing you to set the outward stop anywhere between 45 and 85 mm while the retract remains full. The included -S magnet enables tracking by AirTAC reed or electronic switches, while the fixed NBR bumper decelerates the piston at the end of travel without acting as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.