
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-100S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-100S is a compact double-acting double-rod cylinder featuring an external R (M16x1.5) adjuster screw. Turning this screw shortens the extend stop by up to 100 mm directly on your machine, yielding a usable extend range of 0-90 mm without shims or part changes. Retract remains full, and the adjuster sets the stop position rather than altering the pneumatic area.
The short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit. A fixed NBR bumper decelerates the stroke end, and the built-in magnet supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 0 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 0 to 90 mm on the fly for pressing subassemblies of varying heights without fabricating custom spacers.
Leverage the wide 100 mm adjustment window to test multiple end positions for a new fixture before locking down the final mechanical stop.
Choose this unit when your fixture requires on-site stroke tuning across a wide 0-90 mm window.
Confirm the 63 mm bore, 90 mm nominal stroke, 100 mm adjust window, PT1/4 port, built-in magnet (S), and female M10x1.5 rod thread. A plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The R (M16x1.5) screw shortens the extend stop by up to 100 mm, giving a usable extend of 0-90 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.