
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-50B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X65-50B is a double-acting compact cylinder featuring an external extend stop. A M27x2.0 adjustment screw lets you dial the forward stroke from 15 to 65 mm directly on the machine, avoiding part swaps.
This unit carries the -B option, meaning it uses a male M26x1.5 threaded piston rod rather than the default female cavity. Its short riveted body minimizes axial mounting depth where space is tight. Deceleration at the ends relies on a fixed NBR bumper, which is not an adjustable air cushion. Note this SKU lacks the -S magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X65-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 65 mm |
| Adjustable range | 15 – 65 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M27x2.0 screw to set the exact 15-65 mm extend stop for heavy pressing tasks, ensuring precise force delivery without changing parts.
When sizing this actuator, evaluate the neighboring bores. If your application requires on-site stroke tuning during frequent changeovers, the 50 mm adjustment window is ideal.
Confirm your parameters: 100 mm bore, 65 mm maximum stroke, 50 mm adjust window, PT3/8 port, and male M26x1.5 rod thread. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and does not function as a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push is 801 kgf at 1.0 MPa.
The M27x2.0 screw mechanically shortens the extend stop from the 65 mm maximum down to 15 mm. It does not alter force. The cylinder cannot hold a load on air loss; you need an external rod lock or pilot-operated check valve for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.