Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
- BoreØ100 mm
- Max stroke70 mm
- Adjustable range60–70 mm
- Adjuster threadM27×2.0
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S
The AirTAC SDAJ100X70-10S is a double-acting compact cylinder featuring an external R (M27x2.0) adjuster screw that lets you dial the extend stop on-site between 60 and 70 mm without changing parts. It delivers a massive 3927 N push at 0.5 MPa, matching the output of a standard SDA100 bore because the screw sets the mechanical stop, not the piston area.
Its short riveted body saves axial mounting depth where a larger profile cylinder will not fit. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end. The adjuster is a mechanical stop, not a mid-stroke lock.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S Is Used
Heavy Press Fitments
Dial the 60-70 mm extend stop to seat large bearings precisely without over-traveling, leveraging the 3927 N push force for stubborn components.
Tooling Changeovers
Quickly re-adjust the end position on automated lines during product changeovers, saving axial space with the compact riveted body.
Vertical Lift Stations
Safely lift 200.2 kg payloads with a 2:1 margin, using the external R screw to fine-tune the raise height to exact conveyor levels.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S the Right Cylinder?
When sizing this 100 mm bore, look both ways: moving down, the SDAJ80 provides 2513.3 N push at 0.5 MPa, which may be insufficient for heavy loads; moving up is not an option as this is the largest standard SDAJ bore. This model yields a safe working load of roughly 2356 N (about 60% of its 3927 N capacity) and can vertically lift approximately 200.2 kg with a 2:1 safety margin.
Choose this cylinder if your assembly requires precise on-machine stroke tuning during setup or changeover. Remember that a plain SDAJ does not hold position when air is lost or the valve is centered; use an external rod lock or pilot-operated check valve for load holding. This configuration specifies a 100 mm bore, 70 mm max stroke, 10 mm window, PT3/8 port, a female M18x1.5 rod thread, and an -S magnet.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 60–70 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M27×2.0 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S FAQ
At 0.5 MPa it provides 3927 N push and 3524.9 N pull. At 0.7 MPa it provides 5497.8 N push and 4934.8 N pull. The theoretical maximum push is 801 kgf at 1.0 MPa.
The M27x2.0 R screw shortens the extend stroke by up to 10 mm, yielding a usable 60-70 mm range. The built-in -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X70-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.