
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-10 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The SDAJ100X85-10 is a compact double-acting double-rod cylinder engineered for heavy-duty positioning within tight axial footprints. A fixed NBR bumper decelerates the piston at the stroke ends to absorb shock.
An external M27x2.0 adjuster screw lets you dial the extend stop directly on the machine between 75 and 85 mm without changing parts. This mechanical stop sets the end position without altering the bore area, meaning force remains identical to a standard SDA of this size. Operating at speeds of 30-500 mm/s, it handles dynamic cycles efficiently.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fits into compact machinery frames where axial length is restricted, providing the 200.2 kg vertical lift margin needed to form dense metal components.
The 10 mm on-site adjustment window lets operators fine-tune the extend stop during line changeovers without swapping out the entire cylinder.
This configuration features a 100 mm bore, 85 mm stroke, a 10 mm adjustment window, and a PT3/8 port. Note that this SKU lacks a piston magnet, so it cannot accept reed or electronic switches; choose the -S variant if sensing is required. Because the fixed bumper only decelerates near the end of travel, a plain cylinder will not hold a load if air pressure drops or the valve centers—install an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
Turning the M27x2.0 external screw shortens the extend stop by up to 10 mm, giving a usable extend range of 75 to 85 mm. The retract stroke remains full, and the adjuster acts purely as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.