
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-30B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X85-30B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M27x2.0) screw, you set the forward end position anywhere between 55 and 85 mm directly on the machine, eliminating the need for shims or part swaps.
This 100 mm bore unit uses a PT3/8 port and a male M26x1.5 piston rod thread to handle heavy loads. The short riveted body minimizes axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X85-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 55-85 mm extend stop during press commissioning to apply precise 3927 N clamping force at 0.5 MPa without changing mounting hardware.
Adjust the male M26x1.5 rod outward to accommodate varying pallet widths on the line, using the fixed NBR bumper to absorb heavy stopping energy.
If your application requires less force, sizing down to the SDAJ80 offers 2513.3 N at 0.5 MPa, which may better suit medium-duty tasks without excessive bulk. This specific SKU includes the male M26x1.5 rod end (-B) and lacks a piston magnet, meaning it cannot accept reed or electronic switches without upgrading to the -S variant.
Engineers who require frequent changeovers or trial positioning benefit most from the 30 mm adjustment window. Remember that a plain compact cylinder does not hold position upon air loss or valve centering; the piston drifts, and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 801 kgf at 1.0 MPa.
The R (M27x2.0) screw mechanically shortens the extend stroke from the 85 mm maximum down to 55 mm. It sets the physical stop position and does not alter the output force. This SKU lacks the -S magnet option, so it cannot support sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.