
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-20S is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that lets you dial the extend stop anywhere between 80 and 100 mm directly on the machine. The short riveted body drastically saves axial mounting depth where a larger profile cylinder would never fit.
This 80 mm bore unit uses a PT3/8 air port and a 25 mm piston rod to handle heavy loads, with a safe working capacity around 1508 N (roughly 60 percent of its 0.5 MPa rating). It includes a fixed NBR bumper at each end to decelerate the stroke, and the built-in magnet (-S) supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 80 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 80-100 mm extend stop during press assembly to hit exact insertion depths without re-machining stops.
Quickly reset the extend position for new product runs on a line, saving axial space with its compact riveted body.
Confirm your requirements for the 100 mm maximum stroke, 20 mm adjustment window, PT3/8 port, and the female rod-end thread. The -S magnet enables switch mounting, but note that a plain cylinder drifts on air loss—the fixed bumper only decelerates near the end and does not lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend stroke by up to 20 mm, giving a usable range of 80-100 mm. The -S code means a built-in magnet is included for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.