
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X45-50B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X45-50B is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop down from the 45 mm maximum to any position down to 0 mm directly on your machine. This thin riveted-body design saves crucial axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. End-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the impact; it is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT3/8 air port is fixed by the 80 mm bore size.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X45-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 45 mm |
| Adjustable range | 0 – 45 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 45 mm during initial tooling setup to find the exact press depth for bearings without machining custom spacers.
Switch product families quickly by turning the M20x1.5 adjuster screw to shorten the extend position, accommodating different part heights on the same line.
Choose this adjustable-stop version if your fixture changeovers demand frequent on-machine stroke tuning rather than fabricating custom spacers.
Confirm the 80 mm bore, 45 mm maximum stroke, 50 mm adjustment window, PT3/8 port, and the male M22x1.5 rod thread suit your tooling. Note that a plain SDAJ does not hold position or carry a load when air is lost or the directional valve is centred—the fixed bumper only decelerates near the end of travel. To suspend a load without live pressure, integrate an external rod lock or a pilot-operated check valve into your circuit.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The external M20x1.5 screw acts as a mechanical stop that shortens the extend stroke by up to 50 mm, allowing you to set the usable extend position anywhere from 0 to 45 mm. It does not alter the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.