Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
- BoreØ80 mm
- Max stroke5 mm
- Adjustable range0–5 mm
- Adjuster threadM20×1.5
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B
The AirTAC SDAJ80X5-10B is a compact double-acting single-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop down to 0-5 mm on-site. Because the adjuster sets the mechanical stop rather than the piston area, output force remains identical to a standard SDA of this bore, delivering 2513.3 N of push at 0.5 MPa.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit. This specific SKU includes a male M22x1.5 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B Is Used
Short-Stroke Clamping
Delivers 2513.3 N of clamping force at 0.5 MPa, with the 0-5 mm adjuster allowing exact pinch clearance for varied material thicknesses.
Vertical Lift Stops
Raises payloads up to 128.1 kg with a 2:1 margin, using the mechanical stop to set precise 0-5 mm lifting heights without part changes.
Riveted Body Pressing
Fits into shallow machine frames via its compact riveted body, providing 3518.6 N of extend force at 0.7 MPa for light pressing tasks.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B the Right Cylinder?
When sizing this unit, evaluate both neighbours: stepping down to the SDAJ63 yields 1558.6 N of push at 0.5 MPa, while moving up to the SDAJ100 provides 3927 N. The 80 mm bore here strikes a balance, offering a safe working load of roughly 1508 N (about 60 percent of its 0.5 MPa capacity) and a vertical lift capability near 128.1 kg with a 2:1 safety margin.
Choose this configuration if your fixture requires precise on-machine extend tuning within a 0-5 mm window. Confirm your porting matches the bore-fixed PT3/8 thread and that the male M22x1.5 rod suits your mounting interface. Remember that a plain SDAJ does not hold position upon air loss; integrate an external rod lock or pilot-operated check valve if load holding is required.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–5 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M20×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B FAQ
This 80 mm bore cylinder generates 2513.3 N push and 2267.8 N pull at 0.5 MPa, 3518.6 N push at 0.7 MPa, and a theoretical maximum of 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw shortens the extend end-position within a 0-5 mm window. This SKU features a male M22x1.5 piston rod thread and lacks a magnet, so it cannot support magnetic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X5-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.