Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
- BoreØ80 mm
- Max stroke60 mm
- Adjustable range50–60 mm
- Adjuster threadM20×1.5
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB
The AirTAC SDAJ80X60-10SB is a compact double-acting single-rod cylinder featuring an external extend stop. An M20x1.5 adjuster screw lets you dial the outward stroke from 50 to 60 mm directly at the machine without swapping shims. Because the screw only sets the mechanical stop position, output force remains identical to a standard 80 mm bore SDA, delivering 2513.3 N of push at 0.5 MPa.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-threaded piston rod (-B, M22x1.5) for secure tooling attachment. The short riveted body drastically cuts axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB Is Used
Press Fit Dialing
Use the 50-60 mm extend adjustment to fine-tune press depth for bearings on a machining line, leveraging the 2513.3 N push force without changing parts.
Carton Flap Folding
The male M22x1.5 rod threads securely into forming jaws, while the 10 mm adjust window lets operators compensate for varying cardboard thicknesses on the fly.
Pallet Lift Stops
Lift loads up to 128.1 kg with a 2:1 safety margin, using the M20x1.5 adjuster screw to set exact lift heights for different pallet configurations.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate both neighboring bores. Stepping down to an SDAJ63 yields 1558.6 N of push at 0.5 MPa, whereas moving up to an SDAJ100 provides 3927 N. This SDAJ80X60-10SB generates 2513.3 N at 0.5 MPa, offering a safe working load of roughly 1508 N (about 60 percent of capacity) and a vertical lift capacity near 128.1 kg with a 2:1 margin.
Choose this specific model if your fixture requires precise 50-60 mm extend tuning during frequent changeovers. It carries the -S magnet for position sensing and the -B male M22x1.5 rod end. Remember that a standard cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end of travel and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 50–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M20×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB FAQ
At 0.5 MPa it provides 2513.3 N push and 2267.8 N pull. At 0.7 MPa it provides 3518.6 N push and 3175 N pull. The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend stop by up to 10 mm, giving a usable 50-60 mm range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.