Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
- BoreØ80 mm
- Max stroke60 mm
- Adjustable range30–60 mm
- Adjuster threadM20×1.5
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB
The AirTAC SDAJ80X60-30SB is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop between 30 and 60 mm directly on your machine. Because the adjuster sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, delivering 2513.3 N of push at 0.5 MPa.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M22x1.5 piston rod thread. Its short riveted body saves axial mounting depth where larger profile cylinders cannot fit, while a fixed NBR bumper decelerates the stroke end without acting as a lock. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB Is Used
Heavy Press Fitments
Dial in the 30-60 mm extend stop on heavy press tooling to prevent over-travel, relying on the 2513.3 N push force to seat components accurately.
Pallet Diverter Setup
Fine-tune the diverter stroke length on-site during product changeovers, ensuring the male M22x1.5 rod meets varying pallet widths without part swaps.
Vertical Lift Stops
Adjust the extend endpoint for lifting loads up to 128.1 kg with a 2:1 margin, using the fixed NBR bumper to soften the final deceleration phase.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB the Right Cylinder?
When sizing this 80 mm bore, stepping down to the SDAJ63 yields 1558.6 N of push at 0.5 MPa, whereas moving up to the SDAJ100 provides 3927 N. This model is ideal for setups requiring on-site stroke tuning to perfect end positions during changeovers. A practical computed insight suggests a safe working load of roughly 1508 N, which translates to a vertical lift capacity of about 128.1 kg with a 2:1 safety margin.
Confirm the 80 mm bore, 60 mm maximum stroke, 30 mm adjustment window, and PT3/8 port match your pneumatic layout. The -S code provides the magnetic piston for sensing, and the -B code specifies the male M22x1.5 rod end. Note that a plain cylinder does not hold position if air pressure is lost or the valve is centered; utilize an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 30–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M20×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB FAQ
This 80 mm bore cylinder features a PT3/8 air port and delivers 2513.3 N push / 2267.8 N pull at 0.5 MPa, 3518.6 N push / 3175 N pull at 0.7 MPa, with a theoretical maximum push of 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw mechanically shortens the extend stroke from the 60 mm maximum down to 30 mm without changing the force. The included -S magnet allows tracking of piston position via AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.