
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X60-50 is a double-acting, double-rod compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can set the outward stroke anywhere between 10 and 60 mm without shims or part changes, while the retract motion remains full length.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose the -S option if sensing is required.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the actuation length on the fly to handle varying pallet sizes on a packaging line, using the fixed NBR bumper to absorb the stopping shock.
It is built for operators needing on-site stroke tuning during frequent changeovers. Remember that a plain cylinder does not hold position if air pressure drops or the valve centres—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 60 mm maximum stroke, 50 mm window, PT3/8 port, female rod thread, and lack of magnet for this configuration.
Quick checklist
Turning the M20x1.5 extend-stop screw shortens the outward stroke by up to 50 mm, allowing you to set the end position anywhere between 10 and 60 mm. This mechanism sets the stop and does not alter the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.