
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-10 is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the outward travel anywhere between 55 and 65 mm without swapping shims or parts, making it ideal for fine-tuning heavy end positions. Retract travel remains full length.
The short riveted body saves axial mounting depth where a longer cylinder will not fit, while a fixed NBR bumper decelerates the stroke end. Note this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 55 and 65 mm to perfect bearing seating forces without machining custom spacers.
Install the compact riveted body in tight machine frames where axial depth is restricted but 80 mm force is required.
Choose this model if your fixture requires on-site stroke tuning to perfect a heavy pressing or lifting action. Confirm your parameters: 80 mm bore, 65 mm max stroke, 10 mm adjust window, PT3/8 port, female M14x1.5 rod thread, and no magnet. A plain cylinder drifts when air is lost or the valve is centered, so integrate an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 external screw shortens the extend end position by up to 10 mm, giving a usable extend range of 55 to 65 mm. The screw acts as a mechanical stop and does not alter the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.