
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-40B is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop between 25 and 65 mm directly on your machine. The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot.
This specific SKU includes a male-threaded M22x1.5 piston rod for secure external mounting and uses a PT3/8 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s, and the unit accepts standard AirTAC compact-cylinder accessories.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 25 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 65 mm to accommodate varying part widths on a machining line without fabricating new spacer blocks.
Adjust the male M22x1.5 rod end position on the fly during size changeovers, accommodating different package heights quickly.
Choose this unit if your fixture requires frequent on-machine stroke tuning across a 25-65 mm window.
Confirm the 80 mm bore, 65 mm maximum stroke, 40 mm adjustment window, PT3/8 port, and the male M22x1.5 rod thread. Note that this SKU lacks a piston magnet, so it cannot support reed or electronic switches. Furthermore, a plain cylinder does not hold its load if air pressure drops or the valve centres; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 3518.6 N and pull to 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 external screw shortens the extend end-position by up to 40 mm, yielding a usable 25-65 mm stroke. This sets a mechanical stop and does not alter force. It is not a mid-stroke lock; the cylinder will drift if air is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.