
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-75B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-75B is a double-acting compact cylinder featuring an external R (M20x1.5) adjuster screw that dials the extend stop from 0 to 65 mm directly on your machine. This thin riveted body conserves axial mounting depth where round-body units fail to fit.
Equipped with a male M22x1.5 piston rod (-B), this SKU omits a piston magnet, meaning magnetic switches cannot be used unless specified otherwise. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 0 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 65 mm to test varying insertion depths for bearings without machining new spacers.
Adjust the male M22x1.5 rod endpoint on the fly to accommodate different box heights during production changeovers.
Choose this specific configuration when frequent changeovers demand on-site extend tuning.
Confirm your parameters: 80 mm bore, 65 mm maximum stroke, 75 mm window, PT3/8 port, male M22x1.5 rod, and no magnet. Note that a plain cylinder drifts on air loss or valve centering—the fixed bumper only decelerates near the end. For suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum output is 513 kgf at 1.0 MPa.
Turning the M20x1.5 adjuster screw shortens the extend endpoint by up to 75 mm, allowing usable travel from 0 to 65 mm. It sets the mechanical stop position and does not alter force or lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.