
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-75S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-75S is a compact double-acting double-rod cylinder featuring an external M20x1.5 R adjuster screw. Turning this screw lets you dial the extend stop down from the 65mm maximum all the way to 0mm directly on the machine, eliminating the need for shims or part swaps during setup. Retract travel remains full length.
This 80mm bore actuator utilizes a short riveted body to save axial mounting depth where a round-body or profile cylinder will not fit. It features a fixed NBR bumper at each end to decelerate the stroke end, though it is not an adjustable air cushion or a lock. The built-in piston magnet (-S) supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 0 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 65mm on the fly to set precise contact depth for high-force 2513.3 N press fits without machining new spacers.
Adjust the diverter stroke length on the fly during line changeovers to handle varying package widths while maintaining full retract travel.
When sizing this model, evaluate your force requirements both ways. Choose this specific unit if your fixture changeovers demand on-site stroke tuning across the 0-65mm window.
Confirm the 80mm bore, 65mm stroke, 75mm adjust window, and PT3/8 air port suit your manifold. This configuration includes the -S magnet for sensing and a female M14x1.5 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the stroke end. For a held load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The external M20x1.5 screw shortens the extend stop by up to 75mm, allowing usable extend lengths between 0 and 65mm. The -S option adds a built-in piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.