
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-50S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-50S is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that lets you dial the extend stop directly on your machine anywhere between 25 and 75 mm. The short riveted body drastically reduces axial mounting depth where a larger profile unit would never fit.
A fixed NBR bumper handles end-of-stroke deceleration, meaning there is no adjustable air cushion to tune. This specific build includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. Operating speed spans 30-500 mm/s, and the PT3/8 air port feeds the 25 mm piston rod.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on the fly to push different carton sizes, relying on the fixed NBR bumper to absorb the impact of high-speed 30-500 mm/s cycling.
Choose this model if your fixture requires frequent on-site stroke tuning to accommodate varying part heights. Remember that a plain actuator will not hold a load if air pressure drops or the valve centres; the bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your spec needs an 80 mm bore, 75 mm max stroke, 50 mm adjust window, PT3/8 port, female rod thread, and the -S magnet.
Quick checklist
The external M20x1.5 screw shortens the extend end-position by up to 50 mm, giving a usable range of 25-75 mm without shims. The -S option adds a piston magnet compatible with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.