verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke85 mm
  • Adjustable range45–85 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$138.61 $146.11Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40

The AirTAC SDAJ80X85-40 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the M20x1.5 adjuster screw, you can dial the extend stroke down by up to 40 mm on-site, yielding a usable range of 45 to 85 mm without changing parts.

The short riveted body significantly reduces axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; adding an -S variant is required for position sensing.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke85 mm
Adjustable range45 – 85 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×85Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40 Is Used

conveyor_belt

Product Diverters

Fine-tune the pusher stroke for different carton widths directly at the conveyor, relying on the fixed NBR bumper to absorb the kinetic energy at 30-500 mm/s.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40 the Right Cylinder?

This model is ideal for setups requiring frequent on-machine stroke tuning between 45 and 85 mm. It features a 25 mm piston rod, a female M14x1.5 rod-end thread, and a PT3/8 air port. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder does not hold a load if air pressure is lost or the valve is centred. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40 FAQ

This 80 mm bore cylinder features a PT3/8 air port.

The M20x1.5 adjuster screw mechanically shortens the extend stop from the 85 mm maximum down to 45 mm. It does not alter force or lock the piston mid-stroke; the fixed NBR bumper only decelerates the end of travel.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X85-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.