verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke90 mm
  • Adjustable range70–90 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$161.41 $168.91Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S

The AirTAC SDAJ80X90-20S is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that lets you dial the extend stop anywhere between 70 and 90 mm directly on the machine. Retract travel remains full length.

Its short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit, while the included -S piston magnet supports position sensing via AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. The unit operates at 30-500 mm/s and accepts air through its bore-fixed PT3/8 port.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke90 mm
Adjustable range70 – 90 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×90Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S Is Used

factory

Compact Ejector Setup

Save axial mounting depth in tight machine cells with the short riveted body while fine-tuning the ejection stroke on-site to accommodate varied product heights.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S the Right Cylinder?

Choose this specific model if your assembly requires frequent on-site stroke tuning within the 70-90 mm window.

Confirm the 80 mm bore, 90 mm maximum stroke, 20 mm adjustability window, PT3/8 port, built-in magnet (S), and female M14x1.5 rod-end thread suit your payload. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift and the fixed bumper only decelerates near the end of the stroke. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 70–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S FAQ

It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.

Turning the external M20x1.5 screw shortens the extend stroke by up to 20 mm, allowing on-the-fly positioning between 70 and 90 mm without shims. The included -S magnet enables position feedback using AirTAC reed or electronic switches, while the fixed NBR bumper handles end-of-stroke shock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X90-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.