
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-40 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-40 is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the M20x1.5 adjuster screw lets you dial the forward end-position anywhere between 50 and 90 mm directly on the machine, avoiding part swaps during changeovers.
Its short riveted body drastically cuts axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop on-the-fly for different package widths on a packaging line, using the fixed NBR bumper to absorb the impact of high-speed routing strokes.
Choose this model if your fixture requires frequent trial positioning or on-site stroke tuning across the 50-90 mm window. Confirm your requirements for the PT3/8 air port, the female M14x1.5 rod-end thread, and the 25 mm piston rod. Remember that a plain SDAJ will drift and cannot hold a load if air pressure drops or the valve centers; integrate an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
The M20x1.5 screw mechanically shortens the extend stroke up to 40 mm, allowing on-machine tuning between 50 and 90 mm without altering the force. This specific SKU has no magnet; you must select the -S option to use AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.