
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-75B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-75B is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the M20x1.5 adjuster screw lets you dial the outward stroke anywhere between 15 and 90 mm directly on the machine, avoiding part swaps.
This unit features a 25 mm diameter piston rod with a male M22x1.5 thread end. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 15 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the male M22x1.5 rod endpoint between product runs using the external M20x1.5 screw, eliminating the need for mechanical shims.
Choose the 80 mm if your application requires that intermediate force bracket.
The 75 mm adjustment window is ideal for lines requiring frequent format changeovers or trial positioning. Confirm your requirements for the PT3/8 port, 90 mm maximum stroke, and the male M22x1.5 rod thread. Remember that a plain cylinder drifts when air is lost or the valve centres; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend endpoint by up to 75 mm, yielding a usable outward travel of 15 to 90 mm. It acts as a mechanical stop and does not alter force or lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.