Airtac SE100 Standard Air Cylinder SE100BX250SH
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX250SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 250mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke250 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX250SH
The AirTAC SE100BX250SH is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It features a 100 mm bore and a 250 mm stroke, generating a substantial 3927 N push force at 0.5 MPa (5497 N at 0.7 MPa). Equipped with a SUS304 stainless steel rod and high-temperature FKM Viton seals, this variant operates reliably across a widened temperature range of 0 to 150 C, making it ideal for corrosive washdowns and hot environments.
Unlike traditional tie-rod designs, the SE series utilizes a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush. The integrated magnet (-S) supports position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the sensor grooves on three sides of the body. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration to match your moving load and speed.
Airtac SE100 Standard Air Cylinder SE100BX250SH Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX250SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX250SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX250SH Is Used
Injection Mold Extraction
Handles heavy mold ejection in plastic injection molding, using its 3927 N push at 0.5 MPa to reliably strip dense parts while the FKM seal withstands ambient press heat up to 150 C.
Food Washdown Diverter
Actuates heavy routing gates in food processing lines where the SUS304 stainless rod resists harsh caustic washdowns, and the ISO 15552 footprint allows easy retrofitting.
Hot Stamping Press Feed
Drives heavy material feeders into metal hot-stamping presses, leveraging the 5497 N push at 0.7 MPa and high-temp FKM Viton seals to survive radiated heat near the furnace.
Is the Airtac SE100 Standard Air Cylinder SE100BX250SH the Right Cylinder?
Selecting this 100 mm bore cylinder makes sense when your application requires heavy thrust, specifically 3927 N push at 0.5 MPa. If you need slightly less force, stepping down to the 80 mm bore yields 2513 N push at 0.5 MPa; conversely, scaling up to the 125 mm bore provides 6136 N push at 0.5 MPa for extreme loads. Keep in mind that a plain SE cylinder does not hold its load when air pressure is lost or exhausted—the piston will drift. If your machine requires fail-safe position holding, consider the BSE rod-lock variant or an external pilot-operated check valve. Because this unit carries a 250 mm stroke, the unsupported load can induce side-load bending on the rod bearing; for optimal longevity, use an external guide to prevent cantilevered strain.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX250SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE100BX250SH is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders using the same mounting hardware. It uses a PT1/2 port and an M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX250SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.