Airtac SE100 Standard Air Cylinder SE100BX300SH
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX300SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 300mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke300 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX300SH
The AirTAC SE100BX300SH is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 100 mm bore and a 300 mm stroke, generating a robust 3927 N push force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while surviving high side loads.
Equipped with a SUS304 stainless steel rod and FKM Viton seals, this unit operates reliably in washdown and high-temperature environments up to 150 C. The integrated magnet supports CMSE reed and DMSE electronic position sensors, while the field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration for heavy loads moving at speeds up to 800 mm/s.
Airtac SE100 Standard Air Cylinder SE100BX300SH Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX300SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX300SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX300SH Is Used
Injection Mold Platen Ejection
Provides the 3927 N push force required to eject dense plastic parts from injection molds, utilizing the SUS304 rod to resist corrosive coolant mists.
Heavy Pallet Diverting
Leverages the 300 mm stroke to push heavy pallets sideways off a high-speed conveyor line, with FKM seals surviving ambient heat from nearby ovens.
Hot-Fill Bottle Capping
Applies precise downward capping torque on hot-fill beverage lines, where the 150 C Viton seal prevents degradation during thermal cycling.
Is the Airtac SE100 Standard Air Cylinder SE100BX300SH the Right Cylinder?
Selecting this 100 mm bore yields 3927 N push at 0.5 MPa; if your application requires less force, stepping down to an 80 mm bore provides 2513 N, while moving up to a 125 mm bore offers 6136 N. Because this is a 300 mm stroke, the extended rod is subject to bending under lateral loads—always incorporate an external guide rail to prevent premature rod-bearing wear. This cylinder is dimensionally interchangeable per ISO 15552, meaning it serves as a direct drop-in replacement for other ISO 15552 cylinders without altering mounting hardware.
Note that the adjustable pneumatic cushion only decelerates the piston near stroke end; it is not a locking mechanism. If your machinery must hold a vertical load without live air pressure, you must integrate an external rod lock or pilot-operated check valve, or pivot to the AirTAC BSE series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX300SH FAQ
At 0.5 MPa it provides 3927 N push and 3681 N pull; at 0.7 MPa it provides 5497 N push. The maximum push force is 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-800 mm/s, and uses a PT1/2 port.
Yes. The SE100BX300SH is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders using the same 100 mm bore, 300 mm stroke, and PT1/2 port interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX300SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.