Airtac SE100 Standard Air Cylinder SE100BX350N
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX350N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 350mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke350 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX350N
The AirTAC SE100BX350N is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 footprint for universal retrofitting.
This specific SKU features a SUS304 stainless steel rod paired with an NBR seal, making it highly suitable for environments exposed to moisture, mild chemicals, or frequent washdowns. The field-adjustable air cushion at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts at high speeds without relying on a fixed rubber bumper.
Airtac SE100 Standard Air Cylinder SE100BX350N Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX350N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX350N
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX350N Is Used
Palletizer Case Erector
Provides the 3927 N push at 0.5 MPa required to fold and seal heavy corrugated cardboard flaps on automated palletizing lines, withstanding humid washdown environments via its SUS304 rod.
CNC Chip Blower
Cycles the 350mm stroke to clear heavy metal chips from machining centers, utilizing its adjustable pneumatic cushion to soften end-of-stroke impacts during rapid 800 mm/s retraction.
Beverage Bottle Rinser
Drives 100mm bore power to invert and jet-wash glass bottles, relying on the NBR seal and stainless rod to resist continuous exposure to mildly acidic cleaning solutions.
Is the Airtac SE100 Standard Air Cylinder SE100BX350N the Right Cylinder?
If your application requires less force, stepping down to the 80mm bore yields 2513 N push at 0.5 MPa, whereas moving up to the 125mm bore provides 6136 N push for heavier loads. This 100mm model provides a substantial 801 kgf maximum thrust at 1.0 MPa, but remember that a plain SE cylinder cannot hold a load if air pressure drops—the piston will drift, so integrate a BSE rod lock for fail-safe holding.
With a 350mm stroke, the Ø25mm rod and M20x1.5 thread carry significant side-load leverage; an external guide is strongly recommended to prevent rod-bearing bending under unsupported loads. This unit uses a PT1/2 port, includes no position sensor magnet, and is dimensionally interchangeable with other ISO 15552 cylinders using standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX350N FAQ
At 0.5 MPa, this 100mm bore cylinder provides 3927 N push and 3681 N pull. At 0.7 MPa, the push increases to 5497 N. The absolute maximum thrust is 801 kgf when operating at the maximum 1.0 MPa pressure.
No, a standard SE cylinder relies on live air pressure and will drift if air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke ends; it does not lock the load. For true position holding, consider the AirTAC BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX350N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.