Airtac SE100 Standard Air Cylinder SE100BX650SH
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX650SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 650mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke650 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX650SH
The AirTAC SE100BX650SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for severe washdown and high-temperature automation. Equipped with a SUS304 stainless steel rod and Viton (FKM) seals, it operates reliably up to 150 degrees Celsius where standard elastomers fail. It generates a substantial 3927 N push force at 0.5 MPa and utilizes a PT1/2 port to drive heavy payloads.
Unlike traditional tie-rod bodies, its extruded aluminum barrel lacks external tie rods, yielding a flush profile that resists corrosion and simplifies mounting. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for precise end-position detection, while field-adjustable air cushions at both ends absorb kinetic energy to protect your machinery.
Airtac SE100 Standard Air Cylinder SE100BX650SH Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX650SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX650SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX650SH Is Used
Hot Melt Adhesive Press
Drives a 650mm stroke platen in a packaging line running at 150 C, leveraging the FKM Viton seals and SUS304 rod to withstand heat and chemical exposure.
Bottle Sterilization Gate
Actuates a 100mm bore diverter arm in a beverage washdown zone, using 3927 N push force to move loaded stainless pallets reliably.
Palletizer Stopper Arm
Deploys a heavy 650mm stop mechanism on a conveyor, relying on the ISO 15552 profile and adjustable cushions to halt pallet momentum safely.
Is the Airtac SE100 Standard Air Cylinder SE100BX650SH the Right Cylinder?
This 100mm bore provides 3927 N push at 0.5 MPa. If your payload is lighter, step down to the 80mm bore for 2513 N push; for heavier loads, the 125mm bore yields 6136 N. The FKM seal extends your operating temperature to 150 C, and the SUS304 rod handles corrosive washdowns. As a dimensionally interchangeable ISO 15552 unit, it serves as a drop-in replacement for other ISO 15552 cylinders using identical mounting hardware and a PT1/2 port.
With a 650mm stroke, the 25mm rod experiences significant bending moments under lateral loads. Always use an external guide rail to prevent rod-bearing damage. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load. If air pressure drops, the rod drifts, so add a BSE rod lock for fail-safe position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX650SH FAQ
At 0.5 MPa, it provides 3927 N push and 3681 N pull. At 0.7 MPa, push increases to 5497 N, with a maximum push of 801 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders for drop-in retrofits. However, the adjustable air cushion only decelerates the piston; it does not lock the load. For vertical holding without air pressure, use an AirTAC BSE rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX650SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.