Airtac SE100 Standard Air Cylinder SE100X10
The AirTAC Airtac SE100 Standard Air Cylinder SE100X10 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 10mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke10 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X10
The AirTAC SE100X10 is a double-acting single-rod ISO 15552 profile cylinder engineered for high-force automation. Operating at 0.5 MPa, it delivers a substantial 3927 N push and 3681 N pull, scaling up to a maximum 801 kgf at 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration.
This specific SKU features a 10 mm stroke and lacks the S magnet suffix, meaning it arrives without a built-in position sensor. A field-adjustable air cushion at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 30-800 mm/s.
Airtac SE100 Standard Air Cylinder SE100X10 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X10 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X10
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X10 Is Used
Press Fit Bushings
Drives a short 10 mm stroke to seat bronze bushings into automotive transmission housings, utilizing the 3927 N push force at 0.5 MPa to overcome insertion friction.
Pneumatic Riveting Head
Applies steady squeeze pressure for rivet setting in sheet metal assembly, where the 36 mm adjustable cushion absorbs the shock of the 25 mm rod returning under high load.
Heavy Carton Sealing
Actuates a short-stroke sealing jaw to fold and press corrugated container flaps, relying on the 801 kgf maximum thrust to maintain crisp, tight creases on thick double-wall board.
Is the Airtac SE100 Standard Air Cylinder SE100X10 the Right Cylinder?
Selecting this 100 mm bore makes sense when an application requires heavy thrust that a 80 mm bore cannot provide, pushing 2513 N at 0.5 MPa. If your system needs even more power, the next step up is the 125 mm bore, delivering 6136 N at 0.5 MPa. Because this SKU lacks the -S magnet, you cannot mount CMSE or DMSE position switches directly; if mid-stroke or end-stop signaling is required for this 10 mm travel, step over to the SE100X10S variant. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for any standard 100 mm bore, 10 mm stroke, PT1/2 ported cylinder without altering mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X10 FAQ
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
No. The SE100X10 is a standard double-acting cylinder with adjustable air cushions at both ends, but these cushions only decelerate the piston near stroke end and do not lock the rod. If the application requires true load holding without live air pressure, you must use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.