Airtac SE100 Standard Air Cylinder SE100X1000
The AirTAC Airtac SE100 Standard Air Cylinder SE100X1000 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke1000 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X1000
The AirTAC SE100X1000 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, scaling up to a maximum 801 kgf at 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration.
This 100 mm bore unit features a PT1/2 port and a 25 mm hard-chrome piston rod with an M20x1.5 thread. Because this specific SKU lacks the -S magnet suffix, it does not support CMSE or DMSE position sensing without modification. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts when moving heavy loads at speeds up to 30-800 mm/s.
Airtac SE100 Standard Air Cylinder SE100X1000 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X1000 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X1000
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X1000 Is Used
Automotive Body Welding Clamp
Provides the 3927 N push force required to hold heavy steel panels in a robotic spot-welding fixture, with adjustable cushions softening the impact of rapid clamping.
Pallet Transfer Pusher
Utilizes the 1000 mm stroke to index loaded pallets across a conveyor lane, relying on the rigid 25 mm rod to maintain alignment under high inertial loads.
Heavy Carton Flap Folder
Drives large corrugated carton flaps into position on an automated packing line, using the full 801 kgf maximum thrust to overcome board stiffness.
Is the Airtac SE100 Standard Air Cylinder SE100X1000 the Right Cylinder?
Selecting the SE100X1000 is appropriate when substantial thrust over a long 1000 mm span is required. If you need less force to reduce compressed air consumption, step down to the 80 mm bore, which yields 2513 N of push at 0.5 MPa. Conversely, if your application demands extreme thrust, stepping up to the 125 mm bore provides 6136 N at 0.5 MPa. As a standard ISO 15552 profile cylinder, this unit serves as a drop-in dimensional replacement for comparable 100 mm bore, 1000 mm stroke cylinders, utilizing the same PT1/2 ports and standardized mounting accessories like FA or LB brackets.
Because this model lacks a -S magnet, you cannot track piston position with reed or electronic switches; if your sequence requires end-of-stroke confirmation, specify an SE100X1000S instead. Furthermore, driving a 1000 mm stroke generates significant leverage on the rod bearing. An external guide rail should be installed to prevent side-load bending and premature seal wear. Note that the adjustable end cushions only decelerate the piston near stroke endpoints; they do not lock or hold the load if air pressure is lost. For position holding, consider a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X1000 FAQ
At 0.5 MPa, the SE100X1000 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, matching the standardized mounting footprint and PT1/2 port locations. However, the adjustable air cushions only decelerate the piston at stroke ends; they do not function as a brake. The cylinder will drift if air pressure is lost, so a rod lock is required for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.