Airtac SE100 Standard Air Cylinder SE100X200
The AirTAC Airtac SE100 Standard Air Cylinder SE100X200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X200
The AirTAC SE100X200 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a highly corrosion-resistant body that mounts flush against machine frames to save valuable space in tight assemblies.
This 100mm bore unit features a 25mm piston rod with an M20x1.5 thread, designed to handle substantial side loads. The end caps integrate field-adjustable air cushioning at both ends, allowing technicians to dial in the exact deceleration rate needed to soften hard end stops at high cycle speeds. This specific SKU ships without a sensor magnet, relying on its PT1/2 porting for rapid actuation.
Airtac SE100 Standard Air Cylinder SE100X200 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X200
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X200 Is Used
Hydraulic Press Die Changing
Provides the 3927 N push force required to lock and unlock heavy stamping die sets within machining centers.
Pallet Dispenser Gating
Actuates heavy-duty flap valves on automated palletizing lines, utilizing its 200mm stroke to clear large pallet profiles.
Injection Mold Ejection
Drives the primary ejection plate on mid-sized plastic injection molds, where the 36mm adjustable cushion softens rapid retraction.
Is the Airtac SE100 Standard Air Cylinder SE100X200 the Right Cylinder?
Choosing this 100mm bore depends on your exact load requirements: if 3927 N of push at 0.5 MPa is excessive, step down to the 80mm bore which yields 2513 N, or step up to the 125mm bore for 6136 N if your fixture demands more clamping power. Remember that a plain SE cylinder cannot hold a load if air pressure drops or the valve centers—the piston will drift, so consider an AirTAC BSE rod lock for strict position holding. Furthermore, at 200mm stroke, the 25mm rod and M20x1.5 thread carry significant side load capacity, though any long unsupported stroke still warrants an external guide rail. Because it adheres strictly to ISO 15552 dimensions, it serves as a direct drop-in replacement for any standard ISO 15552 cylinder footprint using identical mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X200 FAQ
At 0.5 MPa, the SE100X200 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE100X200 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using existing mounting brackets and PT1/2 port connections, though this SKU lacks the internal magnet for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.