Airtac SE100 Standard Air Cylinder SE100X232SN
The AirTAC Airtac SE100 Standard Air Cylinder SE100X232SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 232mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke232 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X232SN
The AirTAC SE100X232SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa and features a 232 mm stroke. Built with an extruded aluminum barrel free of external tie rods, the square profile resists corrosion and allows for flush mounting in tight machine envelopes. This specific configuration includes a built-in magnet for position sensing and NBR seals for reliable operation in standard industrial environments.
The cylinder utilizes a field-adjustable air cushion at both ends, allowing technicians to fine-tune end-of-stroke deceleration and minimize impact wear on fast cycling loads. Because the SE100X232SN is dimensionally interchangeable per ISO 15552, it functions as a drop-in replacement for other standard profile cylinders, streamlining retrofitting and procurement processes without requiring custom mounting hardware.
Airtac SE100 Standard Air Cylinder SE100X232SN Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X232SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 232 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X232SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×232 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X232SN Is Used
Injection Mold Clamping
Provides 3927 N of push force at 0.5 MPa to secure injection mold halves during polymer injection cycles.
Press Brake Forming
Drives upper tooling with 5497 N at 0.7 MPa for bending sheet metal, utilizing the 232 mm stroke for deep part clearance.
Pallet Dispenser Pusher
Indexes empty pallets into high-speed packaging lines, using the adjustable cushion to soften hard stops at full extension.
Is the Airtac SE100 Standard Air Cylinder SE100X232SN the Right Cylinder?
Stepping up or down in bore size depends on your load requirements. If the 3927 N push at 0.5 MPa from this 100 mm bore is insufficient, the 125 mm bore offers 6136 N. If you need less force, the 80 mm bore provides 2513 N. Note that a plain SE cylinder does not hold its position or load when air is lost or the valve is centered; the piston will drift. If your application requires position holding without live pressure, consider the BSE rod lock variant.
At a 232 mm stroke, the 25 mm piston rod carries excellent side-load capacity, but long unsupported strokes still require an external guide to prevent rod-bearing bending. When replacing an ISO 15552 unit, match the 100 mm bore, 232 mm stroke, PT1/2 port, and mounting accessory, and utilize the built-in -S magnet for CMSE (reed) or DMSE (electronic) sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X232SN FAQ
The SE100X232SN delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. It features a 100 mm bore, 25 mm rod, PT1/2 port, and operates at speeds of 30-800 mm/s.
Yes, the SE100X232SN is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other standard profile cylinders. You can reuse existing ISO 15552 mounting hardware without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X232SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.