Airtac SE100 Standard Air Cylinder SE100X250SH
The AirTAC Airtac SE100 Standard Air Cylinder SE100X250SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 250mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke250 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X250SH
The AirTAC SE100X250SH is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty actuation. It delivers a substantial 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and a 250 mm stroke to drive demanding loads. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a Viton (FKM) seal, this unit reliably operates in environments up to 150 C where standard TPU seals would fail. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position sensing, while the field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration for heavy payloads.
Airtac SE100 Standard Air Cylinder SE100X250SH Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X250SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X250SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X250SH Is Used
Injection Mold Clamping
Provides the 5497 N push force at 0.7 MPa required to secure heavy injection mold halves, withstanding high ambient heat via the 150 C FKM seal.
Pallet Diverting Arm
Drives a robust routing arm across the 250 mm stroke to redirect heavy pallets on a packaging line, using adjustable cushioning to soften the impact at full extension.
Hydraulic Press Ejection
Ejects dense formed parts from a hydraulic press, relying on the 3681 N retract pull force at 0.5 MPa and the no-tie-rod profile to fit tight press enclosures.
Is the Airtac SE100 Standard Air Cylinder SE100X250SH the Right Cylinder?
Selecting this 100 mm bore makes sense when a 80 mm cylinder's 2513 N push at 0.5 MPa is insufficient, but you want to avoid the larger 125 mm footprint. If your payload requires even more power, stepping up to the 125 mm bore yields 6136 N push at 0.5 MPa. Because this model features a 250 mm stroke, the 25 mm piston rod and M20x1.5 thread handle high side loads, though an external guide rail is recommended for heavy off-center loads.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct drop-in replacement for other ISO 15552 cylinders without altering mounting hardware. Note that while the adjustable cushion softens hard end stops, it is not a braking device; the piston will drift if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X250SH FAQ
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa. It operates at speeds from 30-800 mm/s.
Yes, the SE100X250SH is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 100 mm bore, 250 mm stroke, PT1/2 port, and standard mounting accessories without machining new holes.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X250SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.