Airtac SE100 Standard Air Cylinder SE100X25S
The AirTAC Airtac SE100 Standard Air Cylinder SE100X25S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 25mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke25 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X25S
The AirTAC SE100X25S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a substantial 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 footprint.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable air cushioning at both ends allows technicians to tune the deceleration of the 25 mm stroke, softening hard end stops and reducing mechanical wear on high-impact cycles.
Airtac SE100 Standard Air Cylinder SE100X25S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X25S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X25S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X25S Is Used
Stamping Press Ejection
Uses the 3927 N push force to knock heavy metal blanks out of stamping dies quickly, leveraging the short 25 mm stroke for rapid high-impact cycling.
Pallet Flap Folding
Deploys the high torque of the 100 mm bore to fold thick cardboard flaps on heavy palletizing lines, where the -S magnet confirms fold completion via DMSE sensors.
Injection Mold Separation
Provides the brute clamping and separation force needed to break heavy plastic parts free from injection molds, utilizing adjustable cushioning to protect the mold face.
Is the Airtac SE100 Standard Air Cylinder SE100X25S the Right Cylinder?
Selecting the SE100X25S is ideal when your application demands high force in a very short stroke. If you need to step down, the 80 mm bore provides 2513 N push at 0.5 MPa; stepping up to the 125 mm bore yields 6136 N. Because this is a double-acting cylinder, it will not hold a load if air pressure is lost or the valve centers—the piston will drift, requiring a BSE rod lock for secure positioning.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, matching the 100 mm bore, 25 mm stroke, PT1/2 port, and standard mounting accessories exactly. The robust Ø25 mm rod and M20x1.5 thread handle significant side loads, though even short-stroke applications benefit from verifying external guide alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X25S FAQ
The SE100X25S delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE100X25S is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with a 100 mm bore, matching mounting dimensions, the PT1/2 port, and standard accessory hardware without machining.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.